Advertisements

Blog Archives

How to Minimize Ghosting on Dry Erase Boards


Here’s an very interesting article by Jim Hingst with RTape Corporation. As an alternative to Dry Erase, try SEALs Anti-Graffiti film and this preparation is not needed. Great tip Jim!

Ghosting on dry erase boards is usually the rule, not the exception. If you want your dry erase board to look good years from now with minimal ghosting, you have to condition the surface, before you use it and you have to use the right markers.  I have used the RTape EZErase™ film on my refrigerator for two years.  The surface is as white today as when I applied it. In fact, it is a brighter white than the white of the refrigerator. 

Image

 

Here’s how to condition the surface.  Apply Rain-X® Fast Wax Liquid Formula to the entire surface of the dry erase board, using a cotton rag. (Rain-X® Fast Wax is available at hardware stores, such as Menards.)
 
The Rain-X® Fast Wax forms a protective barrier between the surface of the EZErase™ dry erase vinyl and the ink of the dry erase pens.
 
After waxing the surface, I recommend writing on EZErase™ vinyl with the Quartet® Enduraglide® pens or the RTape dry erase pens.
 
 
To clean off the writing on EZErase™ vinyl, squirt a little Rain-X® Fast Wax on a cotton cloth. See the photo below. 
 
Image
 
With Rain-X® Fast Wax the writing wipes right off leaving no telltale ghosting. See the picture below.  I can’t promise you that EZErase™ will never ghost. I don’t know what dry erase board that doesn’t show ghosting or signs of aging after years of use.  I can only report on the results that I have experienced and recommend that you give it a try.
Image
 
To contact Jim Hingst, write him at hingstjim@gmail.com or at Jim Hingst, PO Box 671, Chesterton, IN 46304 USA. For immediate assistance, call RTape at 1-800-440-1250 or 908-753-5570.
 
© 2012 Jim Hingst
Advertisements

Here’s a very good article on using that laminator and finishing in general.

Finishing Touches

BY JEFFREY STEELE
CREATED: JANUARY 1, 2013

You’ve invested in high-end, wide-format post-press equipment. But one thought keeps nagging at you. Are you making the best use of that investment?

Read More…

28 Ways a laminating machine can help you get prepared | The Survival Mom™


28 Ways a laminating machine can help you get prepared | The Survival Mom™.

Although an article for smaller laminators, are we missing the boat?

SGIA 2012


What In the World is New at SGIA?

Well, I’m on my way to Las Vegas, NV to attend the 2012 SGIA show. I’ll be doing demonstrations of the new SEAL 65 Pro MD laminator for SEAL and Neschen Americas. But I thought it might be nice to actually walk the show, take some photos and talk a bit about what’s new. In the current economic environment, I thought you might like to know what’s happening that could make you some money. So I’ll be taking photos, shooting video and generally posting what looks like a cool product. If you have any suggestions, please email me at mrugen@givemehelp.com.

SEAL 65 Pro MD Laminator

Since I will be demoing the new SEAL laminator, I thought I’d share some initial thoughts with you. This thing is cool! It has a windows based operating system for the control panel, so they can update and upgrade it in the future with things like training videos, dear to my heart. In addition, I actually saw a beta unit do thermal encapsulation at 15 ft per minute! That’s like 5 times faster than norm! If you’ll be attending come see me! Here’s a video that shows off some of the features: http://www.givemehelp.com/usb

%d bloggers like this: