Advertisements

Blog Archives

The State of Finishing and Beyond – My Graphics Guru


The State of Finishing and Beyond

Posted by Neschen Americas on March 13, 2012 at 1:43pm

View Blog

The State of Finishing and Beyond

By Angie Mohni, V.P. Marketing, Neschen Americas

With the technological advances being made in ink used with large format printers, the question that begs an answer is; is finishing really necessary? The answer is a resounding yes!

Despite advances in ink (Solvent, Eco-Solvent, UV, Latex etc.) finishing is still necessary for two very important reasons, protection and enhancement of the image. While inks are indeed adding longevity to images, finishing these images can add an almost indestructible layer of protection to an image while at the same time actually enhancing color.

Manufacturers of laminates are constantly improving the adhesives used along with the film itself. Water-based adhesives are being use where solvent-based adhesive once were. Films are becoming not only better at beating back the suns UV components, but also in adding unique properties like anti-graffiti.

In addition, new adhesives are being developed that allow for unique applications such as wall graphics, re-positionable windows graphics and more. Of course a good laminator is needed to apply these new films.

Laminators themselves are also being moved forward in technology so that while still needed for applying films and adhesives to substrates, they are also being used in more unique applications, such as circuit boards, lamp shades, lenticular signage and more. This requires the makers of said equipment to re-think the possibilities for laminators. Alterations in length, how pressure is applied and controlled and even how media is loaded are now being made a part of the laminator technology advancements.

In addition to all of the above, due to the economic stresses in the marketplace today, manufactures are finding ways to improve film, adhesives and laminators while saving costs. No doubt the engineers are, at this moment, brain-storming in anticipation of the next exciting release of a printer or ink technology.

The bottom-line? Stay tuned for the release of some very interesting products in the next few months.

via The State of Finishing and Beyond – My Graphics Guru.

Advertisements

The Four Steps of Graphic Design


I was taking a look at graphic projects, you know the daily work we get, to see if I could break it down into simplified, logical steps. The reason for this is to start a discussion on how we get things done and to see if you have an opinion on how to better serve the graphic market. So read on and let me know if you agree, disagree, or if you just want to add a step or comment.

Design

Software – Original Designs

Whether you use an Adobe product such as Photoshop or Illustrator, or a more specific product such as FlexiSIGN, PosterShop or SignLab, learning the little tips and tricks that each has for design is essential. Be sure to invest in online, computer-based or live training so you can take full advantage of these fine products.

Web Images – Small Signs

Of course some images in your layout will come from the internet, so it is also essential that you understand formats, resolutions. Also understand copyrights so you don’t get yourself in trouble legally. Take advantage of Googles advances search options to find legal images. Google image searches are awesome and can provide many images for those layouts. Products like Vectormagic and PhotoZoom Pro can also be helpful in resolving resolution issues.

Cameras –Photos

Of course let’s not forget the good ole digital camera. A good camera is great for recording where an image or sign is to be placed, and can be used in mockups. It also can be useful in taking images that are very unique as well. Most of the time a good 8 megapixel camera will do well, especially if you use the programs mentioned above for resolution issues.

The key to all of the above design tools is knowing your tool. Learning, education, training and practice are essentials to getting a good design.

Print

Water Ink – Desktop

Surprisingly, aqueous inks are making quite the comeback in signage and printing. The wider color gamut and cheaper inks are probably part of that equation. In addition, there are many more media, including textiles that are aqueous compatible for instance take a look at some from Neschen Americas.

Solvent Ink – Large

Of course solvent printers are still very popular and well supported. There are many ICC profiles, but be careful with those newer printers where ink sets go beyond CMYK and use orange red, blue, violet inks. Some RIP software does not yet support these extra color channels.

UV Ink – Flat Bed

Flatbed printers are also climbing in popularity, probably due to the fact that many of them can print right to a substrate such as Cintra etc. and because the ink set allow for immediate use outdoors.

Latex Ink – Heat

HP introduced the latex printer but Mimaki now also has a model. This ink set is useful for many reasons. One is that the finished product can immediately be laminated, and two, the ink has a bit more “stretchability” than solvent and thus can handle those acute contours on a vehicle wrap fro instance.

Laminate

One Side – Cut Sheet or Roll-to-Roll

Finishing can be as simple as covering a sheet to roll of prints with a thin film to protect from UV or to add durability to the finished image. There are many films to choose from and many are simple to apply by using a laminator and pressure. Check out some from SEAL®.

Both Sides – Encapsulate

Occasionally, an image may need to be encapsulated where, both sides are laminated. Typically this involves heat-activated laminates, but pressure sensitive laminates can be used as well, if you have the right laminator.

Adhesive Only – Mount

Finally, there are times that we use mounting adhesives. Lately, companies such as SEAL have release adhesives that are permanent on one side and removable on the other. Check our SEAL new gudy window product as an example.

Mount

Foam Board – Signs Etc.

Sometimes we just need a simple adhesive to mount an image to foam board. There are many choices here from a simple spray can of adhesive to more permanent adhesives applied with your laminator.

Plexiglas – Back light

Adding images to the back-side or second surface of a clear Plexiglas can be a bit more challenging. Not only must the image align correctly but the adhesive must be perfectly clear. SEAL makes a product called OptiMount that can be useful here.

Windows – Advertise

Window advertising is a great application and requires two types of adhesives, permanent and removable. The permanent for those location where the customer wants the message to endure for years and removable where the customer wants the message to come down in a few days or weeks and replaced with new advertisement. Again, gudy window by SEAL is a good choice here.

So basically, Im saying there are four steps in successful graphic design and you need to consider each of these in choosing the right tools.

Enhanced by Zemanta
%d bloggers like this: